Annex (1)
 To The Accreditation Certificate No. JAS Test - 006 Dated 2007-08-05
 For Middle East Laboratory and Technical Services/ Amman

 

Scope of Accreditation

Testing of Electrical Products

 

Tested Parameter/
Type of Test
Test Methods/Standards

PVC cable of rated voltage up to and including 450/750V

Insulation thickness

 

   International Standard IEC 60227-3:1993; AMD 1(97) - Clause 5.3.2.

Voltage test on cores

   International Standard IEC 60227-2:2003 - Clause 2.3.

Double-capped fluorescent lamps

Dimensions

  International Standard IEC 60081:2003 - Clause 1.5.3.

Starting characteristics

   International Standard IEC 60081:2003 - Clause 1.5.4.

Lead-acid starter batteries

Identification, labelling

    Jordanian Standard JS 382-1:2001 - Clause 4.1.

Capacity check (Ce)

  Jordanian Standard JS 382-1:2001 - Clause 7.1.

Cranking performance test

 Jordanian Standard JS 382-1:2001 - Clause 7.3.

Charge acceptance test

  Jordanian Standard JS 382-1:2001 - Clause 7.4.

Cranking performance for dry-charged batteries after activation

  Jordanian Standard JS 382-1:2001 - Clause 7.12.

Household electrical appliances

Marking and instructions

   International Standard IEC 60335-1:2001; AMD 1(2004) - Clause7.

Power input and Current

  International Standard IEC 60335-1:2001; AMD 1(2004) - Clause10.

Leakage current

  International Standard IEC 60335-1:2001; AMD 1(2004) - Clause 13.2.

Electric strength

  International Standard IEC 60335-1:2001; AMD 1(2004) - Clause 13.3.

Earth continuity

 International Standard IEC 60335-1:2001; AMD 1(2004) – Clause 27.5.

Conductors of insulated cables

Electric resistance

   International Standard IEC 228:1978

Conduit systems for cable management

Insulation resistance & Dielectric strength

   Jordanian Standard JS 585:2003 - Clause 11.6.1.

Primary batteries

Marking

   Jordanian Standard JS 140-1:2002 - Clause 4.1.6.1.

Battery dimensions

   Jordanian Standard JS 140-1:2002 - Clause 5.6.

Leakage and deformation

   Jordanian Standard JS 140-1:2002 - Clause 5.7.

Discharge test

   Jordanian Standard JS 140-1:2002 - Clause 6.3.

Electric iron

Determination of mass

   Jordanian Standard JS 254:2002 - Clause 6.

Measurement of length of flexible cord

   Jordanian Standard JS 254:2002 - Clause 7.

Measurement of heating-up time

   Jordanian Standard JS 254:2002 - Clause 10.

Measurement of sole-plate temperature

   Jordanian Standard JS 254:2002 - Clause 13.

Audio, video and similar electronic apparatus

Marking and instructions

    International Standard IEC 60065:2001 - Clause 5.

Dielectric strength

   International Standard IEC 60065:2001 - Clause 10.3.2.

Tungsten filament lamps

Marking

   International Standard IEC 60432-1:2005 - Clause 2.2.1.

Insulation resistance

     International Standard IEC 60432-1:2005 - Clause 2.6.

Wattage

     International Standard IEC 60064:2005 - Clause 3.4.1.

 

List of Employees in the laboratory that are technically responsible for issuing the test reports in the scope of accreditation:

1- Deputy Manager / Eng. Mazen Al-Momani.

2- Lab Engineer / Eng. Salameh Sakarneh.

3- Lab Engineer / Eng. Abdulla Qatawneh.