To The Accreditation Certificate No

Tested Parameter/ Type of Test	Test Methods/Standards
Plugs and sokets (thermoplastic and without cover)
Protection aginst electrical shock	§ International Standard IEC 60884-1:2002 – Clause 10.1 & 10.3.
Resistance to heat (only on insulating material necessary to retain current- carrying Parts and parts of the earthing circuit in position)	§ International Standard IEC 60884-1:2002 – Clause 25.1. & 25.2.
Insulating resistance and electrical strength.	§ International Standard IEC 60884-1:2002 – Clause 17.1 & 17.2.
Audio,Video and similar electronic apparatous
Fault condition test with opening/vents closed	§ International Standard IEC 60065:2001 – Clause 11.2.
Heating under normal operating conditions	§ International Standard IEC 60065:2001 – Clause 7.1
Power supply cord conductors–cross sectional	§ International Standard IEC 60065:2001 – Clause 16.2.
Constructional requirments with regard to the protection against electric shcok	§ International Standard IEC 60065:2001 – Clause 8 (excliding 8.7, 8.12, 8.16, 8.17, 8.18 & 8.21).
Electrical shcokhazard under normal operating conditions	§ International Standard IEC 60065:2001 – Clause 9.1.1.2, 9.1.3, 9.1.4, 9.1.5 & 9.1.7 .
Clearances	§ International Standard IEC 60065:2001 – Clause 13.3.2.
Creepage distances	§ International Standard IEC 60065:2001 – Clause 13.4.
IT Products
Maximum temperatures	§ International Standard IEC 60950:2001 – Clause 4.5.1.
Touch current	§ International Standard IEC 60950:2001 – Clause 5.1.1 to 5.1.6.
Electrical Strength	§ International Standard IEC 60950:2001 – Clause 5.2.
Protection aqainst electrical shcok	§ International Standard IEC 60950:2001 – Clause 2.1.1.1 to 2.1.1.4 & 2.1.1.6.
Provision for earthing	§ International Standard IEC 60950:2001 – Clause 2.6.3.
Clearances	§ International Standard IEC 60950:2001 – Clause 2.10.3.2.
Creepage distances	§ International Standard IEC 60950:2001 – Clause 2.10.4.
Luminaires (Tungsten filament and fluorescent lamps)
Leakage Current	§ International Standard IEC 60598-1:2006; - Clause 10.3.
Insulation resistance and electric stregth	§ International Standard IEC 60598-1:2006; - Clause 10.2.
Provision for earthing	§ International Standard IEC 60598-1:2006; - Clause 7.2.3.

To The Accreditation Certificate No. JAS Test - 006 Dated 2007-08-05

For Middle East Laboratory and Technical Services/ Amman

Test Methods/Standards

Plugs and sokets (thermoplastic and without cover)

§ International Standard IEC 60884-1:2002 – Clause 10.1 & 10.3.

§ International Standard IEC 60884-1:2002 – Clause 25.1. & 25.2.

§ International Standard IEC 60884-1:2002 – Clause 17.1 & 17.2.

Audio,Video and similar electronic apparatous

§ International Standard IEC 60065:2001 – Clause 11.2.

§ International Standard IEC 60065:2001 – Clause 7.1

§ International Standard IEC 60065:2001 – Clause 16.2.

§ International Standard IEC 60065:2001 – Clause 8 (excliding 8.7, 8.12, 8.16, 8.17, 8.18 & 8.21).

§ International Standard IEC 60065:2001 – Clause 9.1.1.2, 9.1.3, 9.1.4, 9.1.5 & 9.1.7 .

§ International Standard IEC 60065:2001 – Clause 13.3.2.

§ International Standard IEC 60065:2001 – Clause 13.4.

IT Products

§ International Standard IEC 60950:2001 – Clause 4.5.1.

§ International Standard IEC 60950:2001 – Clause 5.1.1 to 5.1.6.

§ International Standard IEC 60950:2001 – Clause 5.2.

§ International Standard IEC 60950:2001 – Clause 2.1.1.1 to 2.1.1.4 & 2.1.1.6.

§ International Standard IEC 60950:2001 – Clause 2.6.3.

§ International Standard IEC 60950:2001 – Clause 2.10.3.2.

§ International Standard IEC 60950:2001 – Clause 2.10.4.

Luminaires (Tungsten filament and fluorescent lamps)

§ International Standard IEC 60598-1:2006; - Clause 10.3.

§ International Standard IEC 60598-1:2006; - Clause 10.2.

§ International Standard IEC 60598-1:2006; - Clause 7.2.3.